Cornell researchers have discovered how to power simple robots with a novel substance that, when heated, can expand more than 10 times in size, change its viscosity by a factor of 10 and transition from regular to highly irregular granules with surprising force. For more information see the IDTechEx report on new robotics and drones.
You can also eat it with a little butter and salt.
"Popcorn-Driven Robotic Actuators," a recent paper co-authored by doctoral student Steven Ceron, mechanical engineering, and Kirstin H. Petersen, assistant professor of electrical and computer engineering, examines how popcorn's unique qualities can power inexpensive robotic devices that grip, expand or change rigidity.
"The goal of our lab is to try to make very minimalistic robots which, when deployed in high numbers, can still accomplish great things," said Petersen, who runs Cornell's Collective Embodied Intelligence Lab. "Simple robots are cheap and less prone to failures and wear, so we can have many operating autonomously over a long time. So we are always looking for new and innovative ideas that will permit us to have more functionalities for less, and popcorn is one of those."
The study is the first to consider powering robots with popcorn, which is inexpensive, readily available, biodegradable and of course, edible. Since kernels can expand rapidly, exerting force and motion when heated, they could potentially power miniature jumping robots. Edible devices could be ingested for medical procedures. The mix of hard, unpopped granules and lighter popped corn could replace fluids in soft robots without the need for air pumps or compressors.
"Pumps and compressors tend to be more expensive, and they add a lot of weight and expense to your robot," said Ceron, the paper's lead author. "With popcorn, in some of the demonstrations that we showed, you just need to apply voltage to get the kernels to pop, so it would take all the bulky and expensive parts out of the robots."
Since kernels can't shrink once they've popped, a popcorn-powered mechanism can generally be used only once, though multiple uses are conceivable because popped kernels can dissolve in water, Ceron said.
The researchers experimented with Amish Country Extra Small popcorn, which they chose because the brand did not use additives. The extra-small variety had the highest expansion ratio of those they tested.
After studying popcorn's properties using different types of heating, the researchers constructed three simple robotic actuators - devices used to perform a function.
For a jamming actuator, 36 kernels of popcorn heated with nichrome wire were used to stiffen a flexible silicone beam. For an elastomer actuator, they constructed a three-fingered soft gripper, whose silicone fingers were stuffed with popcorn heated by nichrome wire. When the kernels popped, the expansion exerted pressure against the outer walls of the fingers, causing them to curl. For an origami actuator, they folded recycled Newman's Own organic popcorn bags into origami bellows folds, filled them with kernels and microwaved them. The expansion of the kernels was strong enough to support the weight of a nine-pound kettlebell.
The paper was presented at the IEEE International Conference on Robotics and Automation in May and co-authored with Aleena Kurumunda '19, Eashan Garg '20, Mira Kim '20 and Tosin Yeku '20. Petersen said she hopes it inspires researchers to explore the possibilities of other nontraditional materials.
"Robotics is really good at embracing new ideas, and we can be super creative about what we use to generate multifunctional properties," she said. "In the end we come up with very simple solutions to fairly complex problems. We don't always have to look for high-tech solutions. Sometimes the answer is right in front of us."
The work was supported by the Cornell Engineering Learning Initiative, the Cornell Electrical and Computer Engineering Early Career Award and the Cornell Sloan Fellowship.
Source and top image: Cornell University
Learn more at the next leading event on the topic: Sensors USA 2019 on 20 - 21 Nov 2019 at Santa Clara Convention Center, CA, USA hosted by IDTechEx.