A construction robot has created a pavilion using nothing more than loose stones and string. Researchers of ETH Zurich are showing their work as part of an exhibition at the Gewerbemuseum in Winterthur. For more information see the IDTechEx report on New Robotics and Drones 2018-2038 and 3D Printing 2018-2028.
Thirty tonnes of loose stones, 120 kilometres of string - and a construction robot: the Rock Print Pavilion was built using nothing more than these three key elements. The temporary installation at Kirchplatz, in front of the Gewerbemuseum in Winterthur, is a research project run by Gramazio Kohler Research, the ETH Chair of Architecture an Digital Fabrication, and is part of the "Hello, Robot. Design between Human and Machine" exhibition.
Over the last four weeks, the construction robot "In situ Fabricator" has been working to construct a total of 11 three-metre-high pillars. But how can a structure made of loose stones and string be so stable that it can support the eight-tonne steel roof?
The phenomenon is known as "jamming". The ETH research project "Design and Robotic Fabrication of Jammed Architectural Structures" is focused on the robot-based assembly of simple, loose and granular base materials. The loose stones interlock together; when combined with the arrangement of string between the gravel layers - which is continuously calculated by the robot - this creates a stable, highly durable structure.
The Rock Print Pavilion is exploring the possibilities offered by digital and robotic manufacturing. Recycling is also embedded into the project: the components can be easily dismantled and the material reused.
Source and top image: ETH Zurich
Learn more at the next leading event on the topic: 3D Printing USA 2018 on 14 - 15 Nov 2018 at Santa Clara Convention Center, CA, USA hosted by IDTechEx.